No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
RMBASE/4/RM_ADD_DEFAULTRT

RMBASE/4/RM_ADD_DEFAULTRT

Message

RMBASE/4/RM_ADD_DEFAULTRT:The default route is added. (AddrFamily=[AfType], InstanceID=[InstanceID], ProcessID=[ProcID], ProtocolID=[ProtoID], SubProtocolID=[SubProtoID], ExitIf=[Ifname], Nexthop=[Nexthop], Neighbour=[Neighbour], Preference=[Pref], Metric=[Metric])

Description

The default route was added.

Parameters

Parameter Name Parameter Meaning
AfType
Family address type:
  • IPv4
  • IPv6
InstanceID

Instance ID

ProcID

Process ID

ProtoID

Protocol ID

SubProtoID

Sub-protocol ID

Ifname

Outbound interface

Nexthop

Next hop IP address

Neighbour

Neighbor

Pref

Route priority

Metric

Route cost

Possible Causes

The default route was added to the IP routing table.

Procedure

  • This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 136990

Downloads: 90

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next