No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



OSPF/6/HELPER_TIMER_FIRED: OSPF exit helper mode because grace period timer for neighbor expired. (ProcessId=[ProcessId], InterfaceName=[InterfaceName], NbrIpAddr=[NbrIpAddr], (AreaId=[AreaId]))


The OSPF process exited from the helper mode.


Parameter Name Parameter Meaning
ProcessId Indicates the ID of an OSPF process.
InterfaceName Indicates the name of interface.
NbrIpAddr Indicates the IP adress of neighbor.
AreaId Indicates the ID of the OSPF area.

Possible Causes

Helper router grace period timer expired before neighbor finishes graceful restart.


  1. Configure the proper value of grace period on restarting router.
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 169566

Downloads: 110

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next