No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MLD/4/QUERY_INTERVAL_NOT_CONISITENT_MLD

MLD/4/QUERY_INTERVAL_NOT_CONISITENT_MLD

Message

MLD/4/QUERY_INTERVAL_NOT_CONISITENT_MLD:The interval of MLD general query packet received is greater than that of current configuration. (InstanceName=[InstanceName], IfName=[IfName], QueryReceInterval=[QueryReceInterval], QueryInterval=[QueryInterval])

Description

The interval at which the switch receives MLD general query messages is larger than the interval at which the switch sends MLD general query messages.

Parameters

Parameter Name Parameter Meaning
InstanceName VPN instance name.
IfName Name of the interface using which the switch receives MLD general query messages.
QueryReceInterval Interval at which the switch receives MLD general query messages.
QueryInterval Interval at which the switch sends MLD general query messages.

Possible Causes

The interval at which the switch receives MLD general query messages is larger than the interval at which the switch sends MLD general query messages.

Procedure

  1. Check whether the interval at which the switch receives MLD general query messages is larger than the interval at which the switch sends MLD general query messages.

    • If the MLD general query message receiving interval is larger, go to Step 2.
    • If the MLD general query message receiving interval is not larger, go to Step 3.

  2. Set a same value for the General Query message receiving and sending intervals.
  3. Collect log information and configuration information, and then contact technical support personnel.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 136789

Downloads: 90

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next