MLD/4/QUERY_INTERVAL_NOT_CONISITENT_MLD
Message
MLD/4/QUERY_INTERVAL_NOT_CONISITENT_MLD:The interval of MLD general query packet received is greater than that of current configuration. (InstanceName=[InstanceName], IfName=[IfName], QueryReceInterval=[QueryReceInterval], QueryInterval=[QueryInterval])
Description
The interval at which the switch receives MLD general query messages is larger than the interval at which the switch sends MLD general query messages.
Parameters
Parameter Name | Parameter Meaning |
---|---|
InstanceName | VPN instance name. |
IfName | Name of the interface using which the switch receives MLD general query messages. |
QueryReceInterval | Interval at which the switch receives MLD general query messages. |
QueryInterval | Interval at which the switch sends MLD general query messages. |
Possible Causes
The interval at which the switch receives MLD general query messages is larger than the interval at which the switch sends MLD general query messages.
Procedure
- Check whether the interval at which the switch receives MLD general query messages is larger than the interval
at which the switch sends MLD general query messages.
- If the MLD general query message receiving interval is larger, go to Step 2.
- If the MLD general query message receiving interval is not larger, go to Step 3.
- Set a same value for the General Query message receiving and sending intervals.
- Collect log information and configuration information, and then contact technical support personnel.