Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
STACKMNG/4/LEAF_MEMBER_ADD
Message
STACKMNG/4/LEAF_MEMBER_ADD: The leaf member device joined in. (hwStackIdIndex=[hwStackIdIndex], hwStackId=[hwStackId])
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| hwStackIdIndex | ID index of the leaf switch. |
| hwStackId | ID of the leaf switch. |
Procedure
- Check whether the leaf switch is added manually.
If yes, no action is required.
If no, go to step 2.
- Run the display stack configuration command to check whether the
SVF configuration complies with the requirement.
- If yes, go to step 3.
- If no, modify the SVF configuration and remove excess leaf switches.
- Collect trap messages, log messages, and configurations, and then contact technical support personnel.
