No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPF/6/OSPF_MAX_AGE_LSA

OSPF/6/OSPF_MAX_AGE_LSA

Message

OSPF/6/OSPF_MAX_AGE_LSA: An LSA is aged. (RouterId=[RouterId], LsdbAreaId=[LsdbAreaId], LsdbType=[LsdbType], LsdbLsid=[LsdbLsid], LsdbRouterId=[LsdbRouterId])

Description

An LSA in the router LSDB was aged. The possible cause is that the OSPF route imported by the LAS had been deleted by mistake, or the OSPF interface went Down.

Parameters

Parameter Name Parameter Meaning

[RouterId]

ID of the local router

[LsdbAreaId]

Area ID of the new LSA

[LsdbType]

LSA type

[LsdbLsid]

LSA ID in the LSDB

[LsdbRouterId]

Router ID in the LSDB

Possible Causes

Cause 1: The status of the physical interface switched between Up and Down.

Cause 2: The status of the neighbor changed.

Cause 3: The route imported by OSPF changed.

Procedure

  • Contact technical support personnel technical support personnel.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 115510

Downloads: 85

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next