No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ISIS/3/ISIS_ORIG_LSP_BUFF_SIZE_MISMATCH

ISIS/3/ISIS_ORIG_LSP_BUFF_SIZE_MISMATCH

Message

ISIS/3/ISIS_ORIG_LSP_BUFF_SIZE_MISMATCH: The size of the local buffer for originating IS-IS LSPs is smaller than the size of the received LSP. (isisSysInstance=[isisSysInstance], isisSysLevelIndex=[isisSysLevelIndex], isisCircIndex=[isisCircIndex], isisCircIfIndex=[isisCircIfIndex], isisPduLspId=[isisPduLspId], isisPduOriginatingBufferSize=[isisPduOriginatingBufferSize], ifIndex=[ifIndex], IfName=[IfName])

Description

The size of received LSPs was greater than that of the local buffer where LSPs were generated.

Parameters

Parameter Name Parameter Meaning

[isisSysInstance]

Indicates the ID of the IS-IS process.

[isisSysLevelIndex]

Indicates the IS-IS level.

[isisCircIndex]

Indicates the index assigned by an IS-IS interface.

[isisCircIfIndex]

Indicates the index of the interface.

[isisPduLspId]

LSP ID.

[isisPduOriginatingBufferSize]

Indicates the size of a buffer.

[ifIndex]

Indicates the index of the interface.

[IfName]

Indicates the name of the interface.

Possible Causes

The size of LSPs generated on the source was greater than that of LSPs generated on the local.

Procedure

  1. Identify the source where the LSP is generated based on the value of the isisPduLspId field. View the size of LSP packets generated on the source and check whether it is greater than the size of LSPs that are allowed on the local .

    • If so, go to Step 2.

    • If not, go to Step 3.

  2. Run the lsp-length originate max-size command in the IS-IS process on the source to change the size of generated LSPs to be smaller than or equal to the size of the buffer where LSPs are generated on the local .

    • If so, go to Step 4.

    • If not, go to Step 3.

  3. Contact technical support personnel technical support personnel.
  4. End.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 123455

Downloads: 90

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next