Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ISIS/3/ISIS_CORRUPTED_LSP_DETECTED
Message
ISIS/3/ISIS_CORRUPTED_LSP_DETECTED: The LSP checksum is incorrect. (isisSysInstance=[isisSysInstance], isisSysLevelIndex=[isisSysLevelIndex], isisPduLspId=[isisPduLspId])
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
[isisSysInstance] |
ID of an IS-IS process. |
[isisSysLevelIndex] |
IS-IS level |
[isisPduLspId] |
LSP ID |
Procedure
- Run the display memory command to check whether the memory
usage exceeds the threshold (around 80%).
If so, go to Step 3.
If not, go to Step 2.
- Run the reset isis all command to restart an IS-IS process
and check whether the fault is rectified after the process is restarted.
If the fault is rectified, go to Step 4.
If the fault is not rectified, go to Step 3.
- Contact technical support personnel technical support personnel.
- End.
Previous
