No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CONFIGURATION/2/APPDATA_NOT_SYN_active

CONFIGURATION/2/APPDATA_NOT_SYN_active

Message

CONFIGURATION/2/APPDATA_NOT_SYN_active: Inconsistency between application configuration data and master main board configuration data.

Description

The data in the service process database was inconsistent with that in the central database.

Parameters

Parameter Name Parameter Meaning

None.

None.

Possible Causes

The log generated because the data in the service process database was detected inconsistent with that in the central database after data consistency verification was enabled.

Procedure

  1. Run the reset slot slot-id command based on the alarm information to reset the interface board corresponding to the process, synchronizing data in the service process database again. Check whether the alarm is cleared.

    • If the alarm is cleared, no further action is required.

    • If the alarm persists, go to step 2.

  2. Collect trap, log, and configuration information, and contact technical support personnel.
Translation
Download
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 124179

Downloads: 90

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next