No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



PICDRIVER/4/HoldTimeStatusChange: The physical status of the interface changed during the delay period.(Interface=[portname], Reason=[StatusChanged].)


The delay in reporting interface status changes was configured and the physical status of an interface changed because the link was disconnected intermittently.


Parameter Name Parameter Meaning


Interface name.


Status change. The causes are as follows:

  • The physical link status of the interface is Up.
  • The physical link status of the interface is Down.

Possible Causes

Cause 1: The cable on the interface was not securely installed.

Cause 2: The optical module or cable was faulty.


  • Check whether the cable on the interface is securely installed.
  • Check whether the optical module and cable are faulty.
  • Collect trap, log, and configuration information, and contact technical support personnel.
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 176924

Downloads: 112

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next