No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

CloudEngine 8800, 7800, 6800, and 5800 V200R005C00

This document provides the explanations, causes, and recommended actions of logs on the product.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



PIM/3/HOLDTIME_LESS_INL:In the VPN instance, after the BSR holdtime and sending interval were configured, the BSR holdtime was less than the sending interval. (VPNName=[VPNName], HoldTime=[HoldTime], SendInt=[SendInt])


In the VPN instance, the configured BSR holdtime was shorter than the configured interval.


Parameter Name Parameter Meaning
VPNName Name of the VPN instance
HoldTime BSR holdtime
SendInt Interval at which BSR messages are sent

Possible Causes

In the VPN instance, the configured BSR holdtime was shorter than the configured interval.


  • Collect log information and configuration information, and then contact technical support personnel.
Updated: 2019-04-20

Document ID: EDOC1100039602

Views: 178815

Downloads: 112

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next