No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPF_1.3.6.1.4.1.2011.5.25.155.31.5 hwOspfv2IntraAreaRouterIdConflictRecovered

OSPF_1.3.6.1.4.1.2011.5.25.155.31.5 hwOspfv2IntraAreaRouterIdConflictRecovered

Description

OSPF/2/RTRID_CONFLCTRECOVER: OID [oid] Router IDs confliction is recovered. (ProcessId=[integer], AreaId=[ipaddr], OldRouterId=[ipaddr], NewRouterId=[ipaddr])

The system automatically changed the router ID after detecting a router ID conflict in an OSPF area.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.155.31.5 Major communicationsAlarm(2)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

ProcessId

Process ID

AreaId

Area ID

OldRouterId

Old router ID

NewRouterId

New router ID

Impact on the System

The alarm indicates that the router ID conflict has been resolved, and the system will not be affected.

Possible Causes

Two or more indirectly connected routers shared the same router ID within one OSPF area. This router ID conflict caused frequent router LSA refreshment and route flapping. When detecting this conflict, the system automatically changed a router ID to resolve the problem.

Procedure

  • This alarm message is informational only, and no action is required.

Related Information

None

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 69459

Downloads: 45

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next