No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IPFPM_1. hwIpfpmTlpRecovery

IPFPM_1. hwIpfpmTlpRecovery


IPFPM/2/TLP_RECOVERY:OID [oid] The number of board tlp was under the threshold. (BoardIndex=[INTEGER], BoardTlpNumber=[INTEGER], ThresholdValue=[INTEGER])

The number of TLPs configured on a board fell below the TLP threshold.


Alarm ID Alarm Severity Alarm Type




Name Meaning


Indicates the MIB object ID of the alarm.


Board index


Number of TLPs configured on a board


Number of TLPs allowed by a board

Impact on the System

Services will not be affected.

Possible Causes

The number of TLPs configured on a board fell below the TLP threshold.


  • This trap message is informational only, and no action is required.
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 107670

Downloads: 68

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next