No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IPSEC_1. hwIKEPeerreachMax

IPSEC_1. hwIKEPeerreachMax


IPSEC/4/IKEREACHMAXPEER: OID [OID] Current counts of ike peer will reach max limit.

The number of IKE peers dynamically created by the Router has reached 80% of the threshold.


Alarm ID Alarm Severity Alarm Type Warning Communications alarm


Name Meaning
OID Indicates the MIB object ID of the alarm.

Impact on the System

New IKE peers cannot be created after the number of dynamically created IKE peers reaches the threshold.

Possible Causes

The number of IKE peers dynamically created by the firewall has reached 80% of the threshold.


  1. Check the IKE peers connected to the headquarters to see whether there are any unauthorized connections. If so, remove the unauthorized connections.
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 106331

Downloads: 61

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next