No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IPFPM_1.3.6.1.4.1.2011.5.25.316.3.2 hwIpfpmLossRatioRecovery

IPFPM_1.3.6.1.4.1.2011.5.25.316.3.2 hwIpfpmLossRatioRecovery

Description

IPFPM/2/LOSSRATIO_RECOVERY: OID [oid] The loss ratio of IPFPM test instance was under the lower threshold in continuous five test intervals. (TestInstanceId=[integer], AchId=[integer], IpfpmMcpSeqNoHigh=[integer], IpfpmMcpSeqNoLow=[integer], FlowType=[integer], ForwardPktLossRatio=[integer], BackwardPktLossRatio=[integer], InstanceDescription=[octet])

The packet loss ratios of an IP FPM instance fell below the lower threshold over five consecutive measurement intervals.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.316.3.2

Major

qualityOfServiceAlarm(3)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

TestInstanceId

IP FPM instance ID.

AchId

Atomic closed hop ID. Hop-by-Hop performance statistics collection does not support to generate an alarm based on ACH.

IpfpmMcpSeqNoHigh

32 most significant bits of the statistical period ID.

IpfpmMcpSeqNoLow

32 least significant bits of the statistical period ID.

FlowType

Target flow type.

ForwardPktLossRatio

Packet loss rate for the forward target flow.

BackwardPktLossRatio

Packet loss rate for the backward target flow.

InstanceDescription

IP FPM instance description.

Impact on the System

Services will not be affected.

Possible Causes

The network transmission quality becomes good, and the packet loss ratios within five consecutive measurement intervals are lower than the clear alarm threshold.

Procedure

  • This trap message is informational only, and no action is required.
Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 70185

Downloads: 45

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next