No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
RIP_1.3.6.1.4.1.2011.5.25.120.3.1 hwRip2DBOverFlow

RIP_1.3.6.1.4.1.2011.5.25.120.3.1 hwRip2DBOverFlow

Description

RIP/2/DBOVERFLOW:OID [oid] The number of routes on RIP process reached the upper threshold, and thus the RIP process was suspended. (ProcTableIndex=[INTEGER], ProcessId=[INTEGER], DataBaseLimit=[GAUGE])

There has been maximum number of routes added to RIP database for the given process and no more routes can be added to RIP by redistribution or by learning.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.120.3.1 Major processingErrorAlarm (4)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

ProcTableIndex

Indicates the index of the process table.

ProcessId

Indicates the current process ID.

DataBaseLimit

Indicates the current database limit.

Impact on the System

This notification is generated when the number of routes added to RIP database reaches maximum value. RIP process will be suspended at this state.

Possible Causes

Maximum number of routes are added to RIP database for the given process and no more routes can be added to RIP by redistribution or by learning.

Procedure

  1. Based on the network topology and network planning, reduce the number of RIP routes by reducing unnecessary routes and deleting unnecessary routes.
Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 80018

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next