No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
GTL_1. hwGtlDefaultValue

GTL_1. hwGtlDefaultValue


GTL/4/DEFAULTVALUE:OID [oid] Current license value is default, the reason is [OCTET], main board name is [OCTET].

The system used the default configuration of the GTL license, when a license file became invalid.


Alarm ID Alarm Severity Alarm Type Warning other(1)


Name Meaning


Indicates the MIB object ID of the alarm.


Indicates the cause for default authorization.

Impact on the System

  1. Restricted function items in the license will become unavailable.

  2. The thresholds of the resource items in the license will be set the default values.

If the GTL License file is invalid, the trap will be reported each time the device restarts or a master/slave main control board switchover is performed.

Possible Causes

The authentication of the license file failed.


  1. Confirm whether the license file exists. If not, activate a valid license file.
  2. Confirm whether the license file is valid. If not, replace it with a valid license file.
  3. Collect alarm information and configuration information, and then contact technical support personnel.

Related Information


Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 103650

Downloads: 61

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next