No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
WLAN_1. hwApTemperatureTooLowRestoreTrap

WLAN_1. hwApTemperatureTooLowRestoreTrap


WLAN/4/AP_TEMPERATURE_NORMAL:OID [oid] The AP's temperature changes to normal. (APMac=[OPAQUE], APName=[STRING], Temperature=[INTEGER]°C, APID=[INTEGER])

The AP's temperature restores to the normal range.


Alarm ID Alarm Severity Alarm Type Warning equipmentAlarm(5)


Name Meaning
OID Indicates the ID of the MIB object.
APMac Indicates the MAC address of an AP.
APName Indicates the AP name.
Temperature Indicates the temperature of the AP.
APID Indicates the AP ID.

Impact on the System


Possible Causes

The AP's temperature has increased above the lower temperature threshold.


  1. This alarm message is informational only, and no action is required.
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 106782

Downloads: 61

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next