No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ARP_1.3.6.1.4.1.2011.5.25.123.2.33 hwEthernetARPEntryResumeAlarm

ARP_1.3.6.1.4.1.2011.5.25.123.2.33 hwEthernetARPEntryResumeAlarm

Description

ARP/2/ARP_SPECRESUME_TRAP: OID [OID] The number of ARP entries was restored to the specs. (entPhysicalIndex=[INTEGER], Slot name=[OCTET], Specs=[COUNTER], Number of dynamic ARP entries=[COUNTER], Number of static ARP entries=[COUNTER]).

The number of ARP entries fell below the specified threshold.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.123.2.33

Major

qualityOfServiceAlarm

Parameters

Name Meaning

OID

Indicates the MIB object ID of the alarm.

entPhysicalIndex

Physical entity index

Slot name

Board name

Specs

Maximum number of ARP entries

Number of dynamic ARP entries

Number of dynamic ARP entries

Number of static ARP entries

Number of static ARP entries

Impact on the System

None

Possible Causes

The number of ARP entries on the device fell below the specified threshold.

Procedure

  1. This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 70416

Downloads: 45

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next