No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ISIS_1.3.6.1.4.1.2011.5.25.24.2.4.13 hwIsisAdjacencyChangeClear

ISIS_1.3.6.1.4.1.2011.5.25.24.2.4.13 hwIsisAdjacencyChangeClear

Description

ISIS/2/ADJ_CHANGE_CLEAR:OID [oid] The isisAdjacencyChange alarm was cleared. (sysInstance=[integer], sysInstanceofLevel=[integer], sysLevel=[integer], sysInstanceofInterface=[integer], circuit=[integer], ifIndex=[integer], circuitIfIndex=[integer], lspID=[string], adjState=[integer], ifName=[string], hwIsisAdjChangeReason=[integer], hwIsisAdjChangeSubReason=[integer])

The IS-IS neighbor status change alarm is cleared.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.24.2.4.13

Major

equipmentAlarm(5)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

sysInstance

ID of an IS-IS instance

sysInstanceofLevel

Instance level

sysLevel

IS-IS level:
  • 1: Level-1

  • 2: Level-2

sysInstanceofInterface

Interface that belongs to an IS-IS process

circuit

Link ID

ifIndex

Interface index

circuitIfIndex

Interface index

lspID

LSP ID

adjState

Neighbor status:
  • 1: Down

  • 2: Initializing

  • 3: Up

  • 4: Failed

  • 5: Cleared

ifName

Name of an interface

hwIsisAdjChangeReason

Possible causes of the neighbor status change:
  • 1: The hold timer expired.

  • 2: The status of the physical interface changed.

  • 3: It is a protocol-related cause.

  • 4. The BFD session went Down.

  • 5: A configuration was changed.

  • 6. It is a neighbor-related cause.

  • 7. Other causes.

  • 8. The alarm was cleared.

  • 100: The neighbor was cleared.

hwIsisAdjChangeSubReason

Detailed causes of the neighbor status change:
  • 1: An adjacency relationship was established.

  • 2. The adjacency relationship was deleted.

  • 3: An interface was deleted.

  • 4: The interface was suppressed.

  • 5: An invalid Hello packet was received.

  • 6: Authentication failed.

  • 7: A system ID conflict occurred.

  • 8: The maximum number of area addresses in the received Hello packet was different from the local one.

  • 9: The area address of the neighbor was different from the local area address.

  • 10: No Hello packet was received.

  • 11: The interface went Down.

  • 12: Protocols did not match.

  • 13: The neighbor was deleted.

  • 14. The BFD session went Down.

  • 15: The level was changed.

  • 16: The P2P negotiation configuration was changed.

  • 17. The neighbor was reset.

  • 18: The interface type was changed.

  • 19: IS-IS was reset.

  • 20: The NET configuration was deleted.

  • 21: IS-IS was disabled.

  • 2. Levels did not match.

  • 23: The received Hello packet did not carry the local MAC address.

  • 24: Three-way handshake failed.

  • 25: Topologies did not match.

  • 26: Interface IDs did not match.

  • 27: The three-way handshake status was Down.

  • 28: Unknown errors occurred.

  • 29: Optional checksum check failed.

Impact on the System

The system will not be affected.

Possible Causes

The interface instance was deleted.

Procedure

  1. This trap is informational only, and no action is required.

Related Information

None

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 74166

Downloads: 47

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next