No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
HWCM_1.3.6.1.4.1.2011.6.10.2.7 hwCfgRestoreFail

HWCM_1.3.6.1.4.1.2011.6.10.2.7 hwCfgRestoreFail

Description

HWCM/2/RESTORE_CONFIGURATION_FAIL:OID [OID] Failed to restore system configurations.(ErrCode=[ErrorCode])

Failed to restore the system configurations.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.6.10.2.7 Major processingErrorAlarm(2)

Parameters

Name Meaning

OID

Indicates the MIB object ID of the alarm.

ErrorCode

Indicates the error code.

Impact on the System

Configurations for current services are lost.

Possible Causes

The configuration database file was lost or damaged.

Procedure

  1. Run the display startup command to check the startup configuration file. Determine whether the file exists and has correct configuration data.

    • If the file exists and has correct configuration data, go to Step 2.

    • If the file does not exist or have correct configuration data, go to Step 4.

  2. Run the display configuration recover-result command to check configuration restoration failure details.
  3. Collect alarm information and configuration information, and then contact technical support personnel.
  4. End.

Related Information

None

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 70015

Downloads: 45

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next