No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
L2V_1.3.6.1.4.1.2011.5.25.119.1.2.9 hwVplsVcNumberThresholdExceed

L2V_1.3.6.1.4.1.2011.5.25.119.1.2.9 hwVplsVcNumberThresholdExceed

Description

L2V/3/VPLSVC_THRESHOLD_EXCEED_T:OID [OID] The number of VPLS VCs reaches the upper threshold. (LimitClass=[INTEGER], CurrentVcNumber=[GAUGE], UpperThreshold=[GAUGE], MaxiVcNumber=[GAUGE])

The proportion of VPLS VCs created to the maximum VPLS VCs allowed reached the upper alarm threshold.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.119.1.2.9

Minor

qualityOfServiceAlarm

Parameters

Name Meaning

OID

Indicates the MIB object ID of the alarm.

LimitClass

Limit type

CurrentVcNumber

Number of VPLS VCs created

UpperThreshold

Upper alarm threshold

MaxiVcNumber

Maximum number of VPLS VCs allowed

Impact on the System

Services will not be affected.

Possible Causes

The proportion of VPLS VCs created to the maximum VPLS VCs allowed reached the upper alarm threshold.

Procedure

  1. Run the display vpls connection command to check the number of configured VPLS VCs. Reduce the number of VPLS VCs created to prevent device performance deterioration.
Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 69659

Downloads: 45

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next