No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PKI_1.3.6.1.4.1.2011.6.122.34.0.2.14 hwPKILocalCertNearlyExpired

PKI_1.3.6.1.4.1.2011.6.122.34.0.2.14 hwPKILocalCertNearlyExpired

Description

PKI/4/PKILOCALCERTNEARLYEXPIRED: OID [oid] the local certificate is nearly expired. (LocalCertIssuer=[issuer], LocalCertSubject=[subject], LocalCertStartTime=[starttime], LocalCertFinishTime=[finishtime])

The local certificate is about to expire.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.6.122.34.0.2.14 Warning communicationsAlarm

Parameters

Name Meaning
oid Indicates the MIB object ID of the alarm.
issuer Indicates the issuer of the local certificate.
subject Indicates the subject of the local certificate.
starttime Indicates the start time of the local certificate.
finishtime Indicates the end time of the local certificate.

Impact on the System

The service will be invalid after the certificate expires.

Possible Causes

The local certificate is about to expire. The local certificate expiration time is less than the certificate expired prewarning time configured by the pki set-certificate expire-prewarning command.

Procedure

  1. Check whether the system time on the local device is correct.
  2. If the system time is correct, apply for a new local certificate immediately.
Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 69993

Downloads: 45

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next