No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LDP_1.3.6.1.2.1.10.166.4.0.3 mplsLdpSessionUp

LDP_1.3.6.1.2.1.10.166.4.0.3 mplsLdpSessionUp

Description

LDP/2/SESSIONUP: OID [OID] The session went Up. (LdpId=[OPAQUE], LdpEntityIndex=[GAUGE], PeerLdpId=[OPAQUE], PeerLdpId=[OPAQUE], IfIndex=[INTEGER], SessionState=[INTEGER], DiscontinuityTime=[TIMETICK], UnknownMesTypeErrors=[COUNTER], UnknownTlvErrors=[COUNTER], DownReason=[INTEGER], IfName=[STRING])

The status of the LDP session was Up, and the LSPs maintained by the session were set up.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.2.1.10.166.4.0.3

Major

communicationsAlarm(2)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

LdpId

Indicates the LSR ID of the local end and Label Space.

LdpEntityIndex

Indicates the index of the LDP interface.

PeerLdpId

Indicates the LSR ID of the neighbor and Label Space. This parameter, LdpId, and LdpEntityIndex are indexes for SessionState, DiscontinuityTime, UnknownMesTypeErrors, and UnknownTlvErrors.

PeerLdpId

Indicates the LSR ID of the neighbor and Label Space. This parameter is the index for DownReason.

IfIndex

Indicates the interface index corresponding to the session.

SessionState

Indicates the session status.

DiscontinuityTime

Indicates the duration when the session is set up, in milliseconds.

UnknownMesTypeErrors

Indicates the number of unknown error messages and error cods.

UnknownTlvErrors

Indicates the number of unknown error TLVs and error codes.

DownReason

Indicates the cause that the session goes Down.

IfName

Indicates the interface name corresponding to the session.

Impact on the System

Services will not be affected.

Possible Causes

1. The LDP sessions were configured.

2. New routes were installed.

3. The link state recovered.

Procedure

  • This trap message is informational only, and no action is required.

Related Information

None

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 70475

Downloads: 45

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next