No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LSPM_1.3.6.1.2.1.10.166.3.0.1 mplsTunnelUp

LSPM_1.3.6.1.2.1.10.166.3.0.1 mplsTunnelUp

Description

LSPM/2/MPLSTUNNELUP:OID [oid] Tunnel Changes to Up.(SessionTunnelId=[integer], LocalLspId=[integer], IngressLsrId=[integer], EgressLsrId=[integer], OutIfIndex=[integer], mplsTunnelAdminStatus=[integer], mplsTunnelOperStatus=[integer], mplsTunnelIfName=[octet], OutIfName=[octet], mplsTunnelDownReason=[integer])

A trap was generated when a tunnel was established successfully and was Up.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.2.1.10.166.3.0.1

Major

communicationsAlarm(2)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

SessionTunnelId

Indicates the ID of the tunnel.

LocalLspId

Indicates the LSP ID of a session.

IngressLsrId

Indicates the LSR ID of the ingress on the tunnel.

EgressLsrId

Indicates the LSR ID of the egress on the tunnel.

OutIfIndex

Indicates the outgoing interface index of the ingress of the LSP that goes Up.

mplsTunnelAdminStatus

Indicates the management status of the tunnel. 1: Up 2: Down

mplsTunnelOperStatus

Indicates the operating status of the tunnel: 1: Up 2: Down

mplsTunnelIfName

Indicates the name of a tunnel.

OutIfName

Indicates the name of the outgoing interface on the ingress of the LSP that goes Up.

mplsTunnelDownReason

Indicates the reason of Tunnel down.
  • 1: other

  • 2: staticLspDown

  • 3: staticCrlspDown

  • 4: outIfDown

  • 5: resourcePreempted

  • 6: rsvpMessageTimeout

  • 7: rsvpNbrLost

  • 8: bypassTunnelDownOrUnbinded

  • 100: clear

Impact on the System

Services will not be affected.

Possible Causes

The tunnel was created successfully.

Procedure

  • This trap message is informational only, and no action is required.
Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 69487

Downloads: 45

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next