No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPF_1. ospfNbrRestartHelperStatusChange

OSPF_1. ospfNbrRestartHelperStatusChange


OSPF/3/NBRHELPERCHG:OID [oid]: The helper status of the non-virtual neighbor changes. (NbrIpAddr=[ip-address], NbrAddressLessIndex=[interface-index], ProcessId=[process-id], RouterId=[router-id], NbrRtrId=[neighbor-router-id], NbrRestartHelperStatus=[gr-helper-state], NbrRestartHelperAge=[gr-helper-value], NbrRestartHelperExitReason=[quit-reason], InstanceName=[instance-name])

The GR helper status of the OSPF neighbor changed.


Alarm ID Alarm Severity Alarm Type Minor environmentalAlarm (6)


Name Meaning


Indicates the MIB object ID of the alarm.


Indicates the IP address of a non-virtual-link interface.


Indicates the index of the interface.


Indicates the process ID.


Indicates the ID of the local router.


Indicates the ID of a neighboring router.


Indicates the new helper status.
  • 1: Normal Router, not-helping
  • 2: GR Router, not-helping
  • 3: Helper Router, helping


Indicates the remaining time of GR.


Indicates the reason why the router leaves the helper status.
  • 1: not attempted
  • 2: restart/helper in progress
  • 3: restart/helper completed successfully
  • 4: restart/helper exit because of timeout
  • 5: restart/helper exit because of topology changed


Indicates the instance name.

Impact on the System

This trap message is generated when a router enters or leaves the helper status. GR failure affects the normal forwarding of routes.

Possible Causes

During GR, the GR helper status changed.


  1. Perform the following configurations as required:

    • If the active/standby switchover is performed manually or the OSPF process is restarted through GR, go to Step 3.

    • If this trap is generated without any manual operation, go to Step 2.

  2. Collect alarm information and configuration information, and then contact technical support personnel.
  3. End.

Related Information


Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 106565

Downloads: 61

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next