No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LSPV_1. hwLspPingProbe

LSPV_1. hwLspPingProbe


LSPV/4/LSPPINGPROBE: OID [oid] The trap of LSP ping test.(hwLspTunnelID=[INTEGER], hwLspSenderAddress=[INTEGER], hwLspEndPointAddress=[INTEGER], hwLspTTL=[INTEGER], hwLspHandle=[INTEGER])

The device sent an LSP ping test trap to notify the NMS of the LSP ping packet received.


Alarm ID Alarm Severity Alarm Type Warning communicationsAlarm(2)


Name Meaning


Indicates the MIB object ID of the alarm.


ID of the LSP tunnel


Source address of the LSP ping packet


Destination address of the LSP ping packet


TTL value of the LSP ping-packet


Handle value of the LSP ping-packet

Impact on the System

The system will not be affected.

Possible Causes

An LSP ping packet was sent to check the link connectivity.


  1. The alarm is informational only, and no action is required.

Related Information


Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 108285

Downloads: 68

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next