No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
EFM_1.3.6.1.4.1.2011.5.25.136.1.6.17 hwDot3ahEfmNonThresholdRecovery

EFM_1.3.6.1.4.1.2011.5.25.136.1.6.17 hwDot3ahEfmNonThresholdRecovery

Description

EFM/3/NONTHRDRECV:OID [OID] Nonthreshold trap recovered.(IfIndex=[INTEGER], EventLogIndex=[GAUGE], EventLogTimestamp=[TIMETICK], TrapLogOUI=[OPAQUE], TrapLogType=[GAUGE], TrapLogLocation=[INTEGER])

The trap about handshake timeout, a link event, an urgent event, or a remote fault was cleared.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.136.1.6.17 Minor communicationsAlarm(2)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

IfIndex

Indicates the interface index.

EventLogIndex

Indicates the index of the printed log.

EventLogTimestamp

Indicates the time stamp that records when the event occurs.

TrapLogOUI

Indicates the OUI of an event.

TrapLogType

Indicates the type of an event.

TrapLogLocation

Indicates where the event occurs, on the local end or the remote end.

Impact on the System

The system performance is not affected.

Possible Causes

The trap about handshake timeout, a link event, an urgent event, or a remote fault was cleared.

Procedure

  • This trap message is informational only, and no action is required.
Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 69549

Downloads: 45

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next