No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ISIS_1.3.6.1.4.1.2011.5.25.24.2.4.2 hwIsisL1ImportRouteExceedLimit

ISIS_1.3.6.1.4.1.2011.5.25.24.2.4.2 hwIsisL1ImportRouteExceedLimit

Description

ISIS/2/L1_REDIST_EXCEED_LIMIT:OID [oid] The number of level-1 imported routes has exceeded the maximum limit.(sysInstance=[integer], sysProtocol=[integer], sysMTIndex=[integer], sysMaxLimit=[integer], sysTotalRedist=[integer])

The number of imported routes that the routers in the Intermediate System to Intermediate System (IS-IS) Level-1 area advertised exceeded the configured maximum number.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.24.2.4.2

Major

equipmentAlarm(5)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

sysInstance

Number of the IS-IS process

sysProtocol

Protocol type
  • 1: IPv4
  • 2: IPv6

sysMTIndex

Multi-topology ID

sysMaxLimit

Maximum number of imported routes that the routers in the IS-IS Level-1 area can advertise

sysTotalRedist

Number of routes imported by IS-IS

Impact on the System

Some imported routes are not advertised.

Possible Causes

The number of imported routes that the routers in the IS-IS Level-1 area advertised exceeded the maximum number of imported routes that the routers in the IS-IS Level-1 area can advertise.

Procedure

  1. Run the display current-configuration command to check the configuration.

    • If the configured maximum number of imported routes is improper, run the import-route limit command to modify it.

    • If the configured maximum number is proper, go to Step 2.

  2. If incorrect external routes have been imported into the IS-IS process, run the undo import-route command in the IS-IS view to disable external routes from being imported. Then check whether the alarm is cleared.

    • If the alarm is cleared, go to Step 3.

    • If the alarm persists, go to Step 2.

  3. Collect alarm information and configuration information, and then contact technical support personnel.
  4. End.

Related Information

None.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 69662

Downloads: 45

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next