No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
WLAN_1.3.6.1.4.1.2011.6.139.13.1.1.3 hwApPingResultTrap

WLAN_1.3.6.1.4.1.2011.6.139.13.1.1.3 hwApPingResultTrap

Description

WLAN/4/AP_PING_RESULT_NOTIFY:OID [oid] AP ping result. (APMAC=[OPAQUE], APType=[STRING], APName=[STRING], SuccessCount=[INTEGER], FailureCount=[INTEGER]. AverageResponseTime=[INTEGER]ms. MinimumResponseTime=[INTEGER]ms, MaximumResponseTime=[INTEGER]ms, APID=[INTEGER])

The result of AP ping operations issued from the NMS to the AP is reported.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.6.139.13.1.1.3 Warning other(1)

Parameters

Name Meaning
OID Indicates the ID of the MIB object.
APMAC Indicates the MAC address of an AP.
APType Indicates the AP type.
APName Indicates the AP name.
SuccessCount Indicates whether the latest AP ping operation succeeds and the number of successful ping operations. Only the result of the latest ping is kept.
FailureCount Indicates whether the latest AP ping operation succeeds and the number of failed ping operations. Only the result of the latest ping is kept.
AverageResponseTime Indicates the average response time when you query the result of an AP ping operation. The unit is milliseconds. Only the result of the latest ping is kept.
MinimumResponseTime Indicates the minimum response time when you query the result of an AP ping operation. The unit is milliseconds. Only the result of the latest ping is kept.
MaximumResponseTime Indicates the maximum response time when you query the result of an AP ping operation. The unit is milliseconds. Only the result of the latest ping is kept.
APID Indicates the AP ID.

Impact on the System

None.

Possible Causes

The AP ping operation issued from the NMS to the AP is finished.

Procedure

  1. No action is required.

Related Information

None.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 76479

Downloads: 47

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next