No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
POE_1.3.6.1.4.1.2011.5.25.195.40.5 hwPoeSlotPowerOverloadResume

POE_1.3.6.1.4.1.2011.5.25.195.40.5 hwPoeSlotPowerOverloadResume

Description

POE/4/UNITPOWERRESUME: OID [oid] Slot [ULONG1] resume from overdrawing power status. It is consuming [ULONG2] milliwatts while maximum configured power is [ULONG3] milliwatts.

The maximum power configured for the slot is sufficient to provide power for all the PDs connected to the slot.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.195.40.5 Warning equipmentAlarm(5)

Parameters

Name Meaning
OID

Indicates the MIB object ID of the alarm.

[ULONG1] Indicates the slot ID of a PoE-capable card.
[ULONG2] Indicates the current power of the PD.
[ULONG3] Indicates the maximum power configured.

Impact on the System

None

Possible Causes

Cause 1:

PDs with lower priorities are powered off; therefore the slot power supply is sufficient to provide power for all the remaining PDs.

Cause 2:

The maximum power of the PoE-capable card in the slot is adjusted to a larger value.

Procedure

  • This alarm is informational only, and no action is required.
Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 69547

Downloads: 45

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next