No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
FIB_1.3.6.1.4.1.2011.5.25.129.2.9.1 hwFIBOverloadSuspend

FIB_1.3.6.1.4.1.2011.5.25.129.2.9.1 hwFIBOverloadSuspend

Description

FIB/1/OVLDSUSPEND: OID [oid] The interface board is in the overload suspension state because the FIB module is overloaded. (EntityPhysicalIndex=[INTEGER], HwBaseTrapSeverity=[INTEGER], HwBaseTrapProbableCause=[INTEGER], HwBaseTrapEventType=[INTEGER], HwFibOverloadModule=[INTEGER], entPhysicalName=[STRING])

The trap was generated when the number of IPv4/IPv6 FIB route prefixes on the interface board crossed the upper threshold. The number of route prefixes varied with the type of the interface board. When the interface board was in overload suspension state, its forwarding entries were cleared and physical interfaces were in the state of FIB overload down.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.129.2.9.1

Critical

processingErrorAlarm(4)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

EntityPhysicalIndex

Indicates the index of the entity.

HwBaseTrapSeverity

Indicates the alarm severity.

HwBaseTrapProbableCause

Indicates possible causes.

HwBaseTrapEventType

Indicates the alarm type.

HwFibOverloadModule

Indicates overloaded modules:
  • 1: IPv4 module
  • 2: IPv6 module

entPhysicalName

Indicates the name of the entity.

Impact on the System

All routes on the interface board will be deleted, and packets cannot be forwarded.

Possible Causes

The number of IPv4/IPv6 FIB route prefixes on the interface board crossed the upper threshold. The number of route prefixes varied with the type of the interface board.

Procedure

  1. Collect alarm information and configuration information, and then contact technical support personnel.
Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 74235

Downloads: 47

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next