No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PIM_1.3.6.1.4.1.2011.5.25.149.4.0.19 hwPimSGExceed

PIM_1.3.6.1.4.1.2011.5.25.149.4.0.19 hwPimSGExceed

Description

PIM/3/hwPimSGExceed:OID [oid] PIM (S, G) entries of all instances cannot be created because the limit is reached. (hwPimNotificationAddressType=[integer], hwPimNotificationSrcAddr=[binary], hwPimNotificationGrpAddr=[binary], hwPimSGTotalCount=[integer], hwPimInstanceName=[string])

The number of global PIM (S, G) entries created exceeded the maximum number of global PIM (S, G) entries allowed.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.149.4.0.19

Minor

communicationsAlarm

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

hwPimNotificationAddressType

Group address type:
  • 1: IPv4 address

  • 2: IPv6 address

hwPimNotificationSrcAddr

Source address

hwPimNotificationGrpAddr

Group address

hwPimSGTotalCount

Maximum number of global PIM (S, G) entries allowed

hwPimInstanceName

Name of the VPN instance that caused the global PIM (S, G) entries to exceed the maximum number of global PIM (S, G) entries allowed

Impact on the System

No more PIM (S, G) entries can be created.

Possible Causes

The number of global PIM (S, G) entries created exceeded the maximum number of global PIM (S, G) entries allowed.

Procedure

  1. Confirm whether network expansion is required. If network expansion is required, contact technical support personnel.
  2. If the global PIM (S, G) entries of an address family indicated in the alarm information are not needed, delete them to reduce the number of global PIM (S, G) entries.
  3. End.

Related Information

None

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 71706

Downloads: 47

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next