No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MGMD_1.3.6.1.4.1.2011.5.25.149.3.3.16 hwMgmdHostStarGExceed

MGMD_1.3.6.1.4.1.2011.5.25.149.3.3.16 hwMgmdHostStarGExceed

Description

MGMD/3/hwMgmdHostStarGExceed:OID [oid] IGMP or MLD total (*, G) entries on the host side cannot be created because the limit is reached. (hwMgmdNotificationAddressType=[integer], hwMgmdHostNotificationSrcAddr=[binary], hwMgmdHostNotificationGrpAddr=[binary], hwMgmdHostStarGCurrentCount=[integer], hwMgmdInstanceName=[string])

The total number of (*, G) entries of all instances exceeded the maximum number allowed on the user-side IGMP/MLD device.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.149.3.3.16

Minor

communicationsAlarm

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

hwMgmdNotificationAddressType

Group address type:
  • 1: IPv4 address

  • 2: IPv6 address

hwMgmdHostNotificationSrcAddr

Source address

hwMgmdHostNotificationGrpAddr

Group address

hwMgmdHostStarGTotalCount

Maximum limit of total number of (*, G) entries of all instances on the user-side IGMP/MLD device

hwMgmdInstanceName

Name of the VPN instance

Impact on the System

New (*, G) entries cannot be created, because the total number of (*, G) entries of all instances has exceeded the maximum number allowed on the user-side IGMP/MLD device.

Possible Causes

The total number of (*, G) entries of all instances exceeded the maximum number allowed on the user-side IGMP/MLD device.

Procedure

  1. Confirm whether network expansion is required. If network expansion is required, contact technical support personnel.
  2. If the IGMP or MLD (*, G) entries of an address family and instance indicated in the alarm information are not needed, delete them to reduce the number of (*, G) entries.
  3. End.

Related Information

None

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 69592

Downloads: 45

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next