No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPF_1.3.6.1.4.1.2011.5.25.155.31.6 hwOspfv2PeerFlappingSuppressStatusChange

OSPF_1.3.6.1.4.1.2011.5.25.155.31.6 hwOspfv2PeerFlappingSuppressStatusChange

Description

OSPF/2/SUPPRESSFLAPPING_PEER: OID [oid] The status of peer flapping suppress is changed.(ProcessId=[integer], ProcessId=[integer], AreaId=[ipaddr], SelfIfnetIndex=[integer], AreaId=[ipaddr], ifName=[octet], SuppressStatus=[integer], SuppressReason=[integer])

The status of OSPF neighbor relationship flapping suppression changed.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.155.31.6 Major communicationsAlarm(2)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

ProcessId

Process ID

AreaId

Area ID

SelfIfnetIndex

Interface index

ifName

Interface name

SuppressStatus

Suppression status

SuppressReason

Cause of the suppression

Impact on the System

The interface may set the link cost to the maximum value or delay OSPF neighbor relationship reestablishment.

Possible Causes

OSPF neighbor relationship flapping suppression started on the local interface, or the interface exited from the suppression.

Procedure

  • Check whether frequent neighbor relationship flapping occurs.

Related Information

None

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 71911

Downloads: 47

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next