No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
L2IFPPI_1. hwMflpIfResume

L2IFPPI_1. hwMflpIfResume


L2IFPPI/4/MFLPIFRESUME:OID [oid] Loop does not exist in vlan [INTEGER], Interface [OCTET1] resumed, block-time is [GAUGE] for [OCTET2].

The blocked interface where MAC address flapping occurs is recovered.


Alarm ID Alarm Severity Alarm Type Warning equipmentAlarm(5)


Name Meaning

Indicates the MIB object ID of the alarm.

INTEGER Indicates the VLAN ID.
OCTET1 Indicates the blocked interface name.
OCTET2 Indicates the interface recovery cause.

Impact on the System


Possible Causes

The blocked interface is recovered.


  1. This alarm is informational and no action is required.
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 101096

Downloads: 61

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next