No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ENTITYTRAP_1.3.6.1.4.1.2011.5.25.219.2.10.15 hwBrdTempFatalAlarm

ENTITYTRAP_1.3.6.1.4.1.2011.5.25.219.2.10.15 hwBrdTempFatalAlarm

Description

ENTITYTRAP/1/ENTITYBRDTEMP_FATALALARM:OID [OID]Temperature rise over or fall below the critical alarm threshold.(Index=[INTEGER1], EntityPhysicalIndex=[INTEGER2], PhysicalName="[OCTET]", EntityThresholdType=[INTEGER3],EntityThresholdValue=[INTEGER4],EntityThresholdCurrent=[INTEGER5], EntityTrapFaultID=[INTEGER6])

The board overheats. The fan may be faulty.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.219.2.10.15 Critical environmentalAlarm (6)

Parameters

Name Meaning
OID

Indicates the MIB object ID of the alarm.

Index Indicates the entity index.
EntityPhysicalIndex Indicates the entity physical index.
PhysicalName Indicates the entity name.
EntityThresholdType Indicates the alarm type.
EntityThresholdValue Indicates the alarm threshold.
EntityThresholdCurrent Indicates the current temperature.
EntityTrapFaultID Indicates the ID of alarm cause.

Impact on the System

When temperature exceeds the threshold, boards may be faulty. Board failures will cause service interruption.

Possible Causes

The fan is faulty.

Procedure

  1. Run the display temperature command to view the current temperature and upper and lower alarm thresholds. Ensure that the upper and lower thresholds are set properly.
  2. Run the display fan command to check whether the fan is operating properly. If not, repair or replace the fan.

Related Information

None.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 75659

Downloads: 47

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next