No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ENTITYTRAP_1.3.6.1.4.1.2011.5.25.219.2.32.1 hwCapCPUUtilizationRising

ENTITYTRAP_1.3.6.1.4.1.2011.5.25.219.2.32.1 hwCapCPUUtilizationRising

Description

ENTITYTRAP/2/CAPCPUUSAGERISING:OID [oid] Cap CPU utilization exceeded the pre-alarm threshold.(hwCapCPUThresholdType=[INTEGER], hwCapCPUThresholdCurrent=[INTEGER]%, hwCapCPUThresholdValue=[INTEGER]%)

The average CPU usage was too high during packet forwarding.

NOTE:
  • V300R003C10 and later versions support this alarm.

  • If the average CPU usage is higher than 95%, this alarm is triggered.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.219.2.32.1 Major equipmentAlarm(5)

Parameters

Name Meaning

OID

Indicates the MIB object ID of the alarm.

hwCapCPUThresholdType

Indicates the average CPU usage threshold type during packet forwarding.

hwCapCPUThresholdCurrent

Indicates the current average CPU usage during packet forwarding.

hwCapCPUThresholdValue

Indicates the average CPU usage threshold during packet forwarding.

Impact on the System

Services are affected.

Possible Causes

The forwarded traffic volume was high.

Procedure

  • Check whether the forwarded traffic volume is too high. If not, contact technical support personnel.
Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 70214

Downloads: 45

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next