No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



NHRP/4/NHRPHUBUP: OID [oid] NHRP hub is up. (Interface=[interface-name], protocol-address=[protocol-address], mask=[mask], next-hop=[next-hop-address], nbma-address=[nbma-address], type=[peer-type])

The status of the Hub's NHRP mapping entry is Up.


Alarm ID Alarm Severity Alarm Type Warning Communications alarm


Name Meaning

Indicates the MIB object ID of the alarm.


Indicates the tunnel interface name specified in the NHRP mapping entry.


Indicates the protocol address in the NHRP mapping entry.


Indicates the mask of the protocol address.


Indicates the next-hop IP address to the protocol address.


Indicates the public network address in the NHRP mapping entry.

Indicates the type of the NHRP mapping entry. The value can be:
  • hub: The NHRP mapping entry is generated during NHRP registration.
  • static: The NHRP mapping entry is configured by the administrator.
  • dynamic: The NHRP mapping entry is dynamically generated by the device.

Impact on the System

Services are not affected.

Possible Causes

After an NHRP mapping entry is configured on the Spoke, the Spoke sends a registration request to the Hub. After receiving a registration reply from the Hub, the Spoke records that the status of the Hub's NHRP mapping entry is Up.


  • This log message is informational only, and no action is required.
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 106810

Downloads: 61

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next