No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
WLAN_1.3.6.1.4.1.2011.6.139.13.1.1.19 hwApTemperatureTooHighTrap

WLAN_1.3.6.1.4.1.2011.6.139.13.1.1.19 hwApTemperatureTooHighTrap

Description

WLAN/4/AP_TEMPERATURE_TOO_HIGH:OID [oid] The AP's temperature is too high. (APMac=[OPAQUE], APName=[STRING], Temperature=[INTEGER]°C, APID=[INTEGER])

The AP's temperature is higher than the upper temperature threshold.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.6.139.13.1.1.19 Warning equipmentAlarm(5)

Parameters

Name Meaning
OID Indicates the ID of the MIB object.
APMac Indicates the MAC address of an AP.
APName Indicates the AP name.
Temperature Indicates the temperature of the AP.
NOTE:

When the alarm is triggered on the AP2030DN, AP3030DN, AP4030DN, and AP4130DN, the Temperature parameter indicates the alarm triggering threshold rather than the AP's actual temperature.

APID Indicates the AP ID.

Impact on the System

The AP's temperature is higher than the upper temperature threshold.
  • If the upper temperature threshold is not high, it has no impact on services.
  • If the upper temperature threshold is high, the AP cannot work properly, affecting WLAN services.

Possible Causes

1:

The upper temperature threshold is set to an improper value.

2:

The ambient temperature is high.

Procedure

  1. Run the display ap-system-profile { all | name profile-name } command to check whether the upper temperature threshold is set properly.

    • If so, go to Step 3.
    • If not, go to Step 2.

  2. Run the high-temperature threshold max-temperature command to set a proper upper temperature threshold.

    • If the alarm persists, go to Step 3.
    • If the alarm is cleared, go to Step 5.

  3. Reduce the ambient temperature by turning down air-conditioners or increase heat dissipation devices.

    • If the alarm persists, go to Step 4.
    • If the alarm is cleared, go to Step 5.

  4. Collect alarm messages, log messages, and configurations, and then contact the technical support personnel.
  5. End.
Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 71858

Downloads: 47

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next