No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
RSVP_1. hwRsvpTeIfNbrThresholdExceedClear

RSVP_1. hwRsvpTeIfNbrThresholdExceedClear


RSVP/3/RSVPIFNBRTHRESHOLDEXCEEDCLEAR: OID [oid] The number of RSVP neighbors fell below the threshold. (hwRsvpTeIfName=[octet])

The proportion of configured RSVP neighbors to all supported ones fell below the lower alarm threshold.


Alarm ID Alarm Severity Alarm Type




Name Meaning


Indicates the MIB object ID of the alarm.


Name of an RSVP interface

Impact on the System


Possible Causes

The proportion of configured RSVP neighbors to all supported ones on a specified interface fell below the lower alarm threshold.


  1. This alarm message is informational only, and no action is required.
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 107656

Downloads: 68

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next