No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPF_1.3.6.1.2.1.14.16.2.12 ospfOriginateLsa

OSPF_1.3.6.1.2.1.14.16.2.12 ospfOriginateLsa

Description

OSPF/4/OGNLSA:OID [oid]: An LSA is generated. (LsdbAreaId=[area-id], LsdbType=[lsa-type], LsdbLsid=[lsdb-ls-id], LsdbRouterId=[lsdb-router-id], ProcessId=[process-id], RouterId=[router-id], InstanceName=[instance-name])

A router generated new LSAs. The possible cause was that the status of the interface changed, the status of the OSPF neighbor changed, or the role of the router changed (for example, the router imported routes).

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.2.1.14.16.2.12 Warning environmentalAlarm (6)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

LsdbAreaId

Indicates the area ID of a new LSA.

LsdbType

Indicates the type of the LSA.
  • 1: Router LSA
  • 2: Network LSA
  • 3: Summary LSA type 3
  • 4: Summary LSA type 4
  • 5: AS External LSA
  • 7: NSSA LSA
  • 9: Opaque LSA - scope Local
  • 10: Opaque LSA - scope area
  • 11: Opaque LSA - scope AS

LsdbLsid

Indicates the LS ID of an LSDB.

LsdbRouterId

Indicates the router ID of an LSDB.

ProcessId

Indicates the process ID.

RouterId

Indicates the router ID of the local router.

InstanceName

Indicates the instance name.

Impact on the System

If the neighbor or interface status change trap is generated and no manual operations are performed within the period, services may be affected.

Possible Causes

1. The status of the interface changed.

2. The status of the neighbor changed.

3. The routes imported by OSPF changed.

Procedure

  1. Check the LSA type:

  2. Run the display ip routing-table lsdb-ls-id command to check whether the routing table changes.

    • If the routing table does not change, go to Step 3.

    • If the routing table changes, continue to check the cause of the route change or go to Step 3.

  3. Collect alarm information and configuration information, and then contact technical support personnel.
  4. End.

Related Information

None

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 75550

Downloads: 47

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next