No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
NQA_1. nqaJitterStatsJitterThresholdNotificationSD

NQA_1. nqaJitterStatsJitterThresholdNotificationSD


NQA/4/JITTERSDTHRESHOLD:OID [oid] NQA entry Jitter-SD over threshold. (OwnerIndex=[OCTET], TestName=[OCTET])

The jitter from the source to the destination exceeded the set threshold.


Alarm ID Alarm Severity Alarm Type Warning qualityOfServiceAlarm(3)


Name Meaning


Indicates the MIB object ID of the alarm.


Manager of an NQA test instance


Name of a test in an NQA test instance

Impact on the System

The system is not affected.

Possible Causes

The jitter from the source to the destination exceeded the set threshold.


  1. Cancel configurations for the jitter threshold from the source to the destination.

Related Information


Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 81696

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next