No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
BULKSTAT_1. hwBulkStatTransferFileDiscard

BULKSTAT_1. hwBulkStatTransferFileDiscard


BULKSTAT/4/FILE_DISCARD:OID [oid] The file was discarded because of transfer failure. (FileIndex=[integer], FileName=[octet], LastTransferFailTime=[integer])

The file is not uploaded when the saving period for the statistics file is over. The device stops the upload, deletes the compressed file in the memory, and sends this trap. The trap has no corresponding recovery trap because the file cannot be restored after being deleted.


Alarm ID Alarm Severity Alarm Type Warning processingErrorAlarm(4)


Name Meaning


Indicates the MIB object ID of the alarm.


Indicates the index of a file.


Indicates the name of a file.


Indicates the last data-collecting moment in the last failed upload.

Impact on the System

The data of an upload interval is lost on the BULK FTP host server.

Possible Causes

Failed to upload the file.


  1. Check whether the hwBulkStatURLConnectionFail alarm is received.

    • If so, go to Step 2.

    • If not, go to Step 3.

  2. Clear the alarm based on the hwBulkStatURLConnectionFail alarm handling suggestion. Go to Step 4.
  3. Collect alarm information and configuration information, and then contact technical support personnel.
  4. End.

Related Information


Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 103498

Downloads: 61

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next