No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
WLAN_1.3.6.1.4.1.2011.6.139.18.1.1.1.8 hwWlanStaWepIdConflictTrap

WLAN_1.3.6.1.4.1.2011.6.139.18.1.1.1.8 hwWlanStaWepIdConflictTrap

Description

WLAN/4/SSID_CONFLICT_WEP_KEY:OID [oid] SSID Wep key conflict notify.(APMAC=[OPAQUE],WepIDConflictTrapAPMAC=[OPAQUE],WepIDConflictTrapAPName=[OCTET],WepIDConflictTrapRadioId=[INTEGER],WepIDConflictTrapPreSSID=[OCTET],WepIDConflictTrapCurrSSID=[OCTET],WepIDConflictTrapCipherIdx=[INTEGER], APID=[INTEGER])

WEP key ID collision has occurred.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.6.139.18.1.1.1.8 Warning processingErrorAlarm(4)

Parameters

Name Meaning
OID Indicates the ID of the MIB object.
APMAC Indicates the MAC address of an AP.
WepIDConflictTrapAPMAC Indicates the MAC address of an AP.
WepIDConflictTrapAPName Indicates the AP name.
WepIDConflictTrapRadioId Indicates the radio ID configured on the AP when the collision happens.
WepIDConflictTrapPreSSID Indicates the SSID configured before the collision.
WepIDConflictTrapCurrSSID Indicates the SSID configured when the collision happens.
WepIDConflictTrapCipherIdx Indicates the WEP key ID that causes the collision.
APID Indicates the AP ID.

Impact on the System

Users fail to go online.

Possible Causes

Different WEP key IDs are configured in the security profiles bound to different VAPs.

Procedure

  1. Run the wep key command to change key-id in the security profiles.

    • If the alarm persists, go to Step 2.
    • If the alarm is cleared, go to Step 3.

  2. Collect alarm messages, log messages, and configurations, and then contact the technical support personnel.
  3. End.

Related Information

None.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 70261

Downloads: 45

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next