No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
WLAN_1.3.6.1.4.1.2011.6.139.13.1.1.40 hwApFmeaPHYFaultTrap

WLAN_1.3.6.1.4.1.2011.6.139.13.1.1.40 hwApFmeaPHYFaultTrap

Description

WLAN/4/WINFO_INFO_ID_AP_FMEA_FAULT_PHY_CMOS:OID [oid] AP PHY CMOS fault. (AP MAC=[OPAQUE], AP Name=[STRING], APID=[INTEGER])

The AP's PHY chip fails.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.6.139.13.1.1.40 Warning equipmentAlarm (5)

Parameters

Name Meaning
OID Indicates the ID of the MIB object.
AP MAC Indicates the MAC address of an AP.
AP Name Indicates the AP name.
APID Indicates the AP ID.

Impact on the System

The AP cannot properly work.

Possible Causes

The AP's PHY chip fails.

Procedure

  1. Check whether services are affected.

    • If so, go to Step 2.
    • If not, go to Step 4.

  2. Restart the AP. Then, check whether the alarm persists.

    • If so, go to Step 3.
    • If not, go to Step 5.

  3. Replace the faulty AP. Then, check whether the alarm persists.

    • If so, go to Step 4.
    • If not, go to Step 5.

  4. Collect alarm messages, log messages, and configurations, and then contact the technical support personnel.
  5. End.

Related Information

None.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 76570

Downloads: 47

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next