No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LSPM_1. hwMplsResourceTotalCountExceed

LSPM_1. hwMplsResourceTotalCountExceed


LSPM/2/MPLSRESOURCETOTALCOUNTEXCEED: OID [oid] The number of used MPLS resources reached the maximum number. (hwMplsResourceType=[integer], hwMplsResourceTotalCount=[integer])

The number of used MPLS resources reached the maximum number of MPLS resources supported by a device.


Alarm ID Alarm Severity Alarm Type




Name Meaning


Indicates the MIB object ID of the alarm.


Type of MPLS resource


Maximum number of MPLS resources supported by a device

Impact on the System

If new MPLS services are created after the number of existing MPLS resources of a specific type has reached the maximum number, services may be affected.

Possible Causes

The number of used MPLS resources reached the maximum number of MPLS resources supported by a device.


  1. Check the hwMplsResourceType field and obtain the MPLS resource type.
  2. Delete configurations that use MPLS resources or configurations or messages that trigger MPLS resource consumption to reduce MPLS resource usage. Then check whether the alarm is cleared.
    • If the alarm is cleared, go to Step 4.
    • If the alarm persists, go to Step 3.
  3. Collect alarm information and configuration information, and then contact technical support personnel..
  4. End.
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 106569

Downloads: 61

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next