No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
BGP_1. hwBgpPeerRouteNumThresholdClear

BGP_1. hwBgpPeerRouteNumThresholdClear


BGP/2/ROUTETHRESHOLDCLEAR:OID [oid] The number of routes received from the BGP peer decreased below the alarm threshold. (InstanceId=[gauge], Afi=[integer], Safi=[integer], PeerType=[integer], PeerRemoteAddr=[binary], MaxRouteNum=[gauge], AlarmThreshold=[gauge])

The number of routes received from the peer configured with the route limit decreased below the alarm threshold (MaxRouteNum x AlarmThreshold).


Alarm ID Alarm Severity Alarm Type Major



Name Meaning


Indicates the MIB object ID of the alarm.


Indicates the index of the instance to which the peer belongs.


Indicates the address family:
  • 1: ipv4

  • 2: ipv6

  • 25: vpls

  • 196: l2vpn


Indicates the sub-address family:
  • 1: unicast

  • 2: multicast

  • 4: mpls

  • 65: vpls

  • 128: vpn


Indicates the address type of the peer:
  • 1: ipv4

  • 2: ipv6


Indicates the address of the peer.


Indicates the maximum number of routes that can be received from the peer.


Indicates the alarm threshold (expressed in percentage) for the route limit on the peer.

Impact on the System


Possible Causes

The number of routes received from the peer configured with the route limit decreased below the alarm threshold.


  1. This alarm message is informational only, and no action is required.
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 100781

Downloads: 61

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next