No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
HSB hwEsapHsbStatusNotification

HSB hwEsapHsbStatusNotification


HSB/4/HSBGRPVRRPTRAP: OID [oid] Hot Standby Group status change trap.(HsbIndex=[GAUGE],HsbGroupId=[INTEGER],Time=[OCTET], EsapHsbBasicEventDescription=[OCTET])

When the HSB group status changes, this alarm is generated.


Alarm ID Alarm Severity Alarm Type Warning communicationsAlarm(2)


Name Meaning
oid ID of a MIB object.
HsbIndex ID of an HSB service.
HsbGroupId ID of an HSB group.
Time Time when the alarm is generated.
EsapHsbBasicEventDescription Event description.

Impact on the System


Possible Causes

When the HSB group status changes, this alarm is generated.


  1. This log message is informational only, and no action is required.
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 107823

Downloads: 68

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next