No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

AR100, AR120, AR160, AR1200, AR2200, AR3200, and AR3600 V300R003

This document provides the trap description, attributes, parameters, impact on the system, possible causes, procedures, and references. This document provides a complete set of traps, through which intended readers are kept of the running status of the device so as to locate faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ENTITYTRAP_1.3.6.1.4.1.2011.5.25.219.2.2.34 hwStorageInsufficient

ENTITYTRAP_1.3.6.1.4.1.2011.5.25.219.2.2.34 hwStorageInsufficient

Description

ENTITYTRAP/3/STORAGEINSUFFICIENT:OID [oid] Storage utilization exceeded the alarm threshold.(Index=[INTEGER], PhysicalName="[OCTET]", StorageName="[OCTET]", ThresholdValue=[INTEGER](KB), CurrentValue=[INTEGER](KB))

The storage space was insufficient.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.219.2.2.34 Minor equipmentAlarm(5)

Parameters

Name Meaning
OID

Indicates the MIB object ID of the alarm.

Index Indicates a physical index.
PhysicalName Indicates an entity name.
StorageName Indicates the storage device name.
ThresholdValue Indicates the alarm threshold.
CurrentValue Indicates the current value.

Impact on the System

Logs or other data cannot be saved.

Possible Causes

Too many files (such as logs) were stored or generated on the device.

Procedure

  • Run the delete command in the user view to delete the specified file in the storage device. Clean up the disk space.
Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100041475

Views: 80666

Downloads: 49

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next